Sensor amplifier Standard modeIV2-G30

模型

IV2-G30

类型

标准类型

工具

可用模式

Standard mode

标准模式内置工具

Outline, Color area^*1, Area^*2, Edge pixels, Color average^*1, Brightness average^*2, Width, Diameter, Edge presence, Pitch, OCR, Color/brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge)

Number of tools

检测工具：16个工具，位置调整工具：1个工具^*3

Switch settings (programs)

128 programs (when using SD card) / 32 programs (when not using SD card)

指标

PWR/ERR，OUT，TRIG，状态，链接/ACT，SD

Image history

存储图像的数量

1000张图像^*4

Save conditions

Selectable between NG only, NG and OK near threshold^*5， 和所有^*4

图像数据传输

Transfer destination

Selectable between SD card and FTP server

Transfer format

在BMP，JPEG，IV2P和TXT之间可选

Transfer conditions

Selectable between NG only, NG and OK near threshold^*5， 和所有

Analysis information

RUN display

工具列表（判断结果，相似程度或相似性栏显示程度）^*6

RUN information

在OFF，直方图，处理时间，计数和输出监视器之间可切换
Histograms: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGs
Processing time: Processing time (latest, Max., Min., Ave.), Image capture interval (latest, Max., Min., Ave.)
数:触发麻木ers, Number of OKs, Number of NGs, Trigger errors, Strobe errors
Output monitor: ON/OFF status by output

Other functions

Image capture function

Image buffer, Image capture range, Digital zoom (2×, 4×), HDR, High gain, Color filter^*1, White balance^*1, Brightness correction

工具功能

Mask outline, Masking function, Color extraction/exclusion^*1, Color histogram function^*1, Monochrome histogram function^*2, Scaling function

公用事业

Failing sensor list, Failure hold, Test run, I/O monitor, Security settings, Simulator^*7

输入

类型

Switchable between non-voltage input and voltage input
For non-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)
For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V)

输入数量

8（1至in8）

功能

IN1: External trigger, IN2 to IN8: Enable by assigning optional functions
可分配功能：程序切换，清晰错误，外部主图像注册，SD卡保存取消

Output

类型

Open collector output; NPN/PNP switchable, N.O./N.C. switchable
对于开放式收集器NPN输出：最大额定值为26.4 V，50 mA，剩余电压1.5 V或更少
For open collector PNP output: Maximum rating of 26.4 V, 50 mA, residual voltage of 2 V or less

Number of outputs

8 (OUT1 to OUT8)

功能

通过分配可选功能启用
Assignable functions: Total judgment (OK/NG), Run, Busy, Ready, Strobe, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool, Error, SD card error

Ethernet

Standard

100base-tx/10base-t

Connector

RJ45 8针连接器

网络功能

FTP client, SNTP client

Interface compatibility

内置以太网

以太网/IP^TM, PROFINET, TCP/IP non-procedure communication

通信单元

以太猫^Ⓡ，CC-Link，Devicenet^TM, PROFIBUS, RS-232C^*8

Expanded memory

SD card (SD/SDHC)^*9

Rating

电压

24 VDC±10％（包括波纹）

目前的消费

1.8 A or less (including communication unit and output load)

环境阻力

Ambient temperature

0至 +50°C32至122°F(No freezing)

相对湿度

35 to 85% RH (No condensation)

Material

Main unit case: PC, Power connector: PA/POM, I/O connector: PA, Sensor head connector: Zinc + Ni plating/PA,
以太网连接器：铜合金 + NI电镀，主单元后散热器：铝，主装置后台轨固定选项卡：POM，铭牌：PC

Weight

大约330 g