SpecsMulti-Purpose CCD Laser MicrometerIG series

Model		IG-010	IG-028
Image
Operation principle		CCD method
Light source	Wavelength	660 nm (Visible light semiconductor laser)
	食品及药物管理局	Class 1^*1
	IEC/JIS	Class 1
Mounting distance		0 to 1000 mm39.37"	0 to 1500 mm59.06"
Measurement range		10 mm0.39"	28 mm1.10"
Sampling cycle		980 µs (When the number of times for averaging is set to [hsp]: 490 µs)
Minimum detectable object	High sensitivity mode	ø0.1 mmø0.003"（Setting distance: 100 mm3.94")^*2
	Standard mode	ø0.2 mmø0.007"（Setting distance: 40 mm1.57"or less), ø0.5 mmø0.02"（Setting distance: 500 mm19.68")^*2	ø0.2 mmø0.007"（Setting distance: 50 mm1.97"or less), ø0.5 mmø0.02"（Setting distance: 500 mm19.68")^*2
Repeatability		5 µm0.20 Mil（Setting distance: 100 mm3.94") 10 µm0.39 Mil（Setting distance: 500 mm19.68") 80 µm3.15 Mil（Setting distance: 1,000 mm39.37")^*3	5 µm0.20 Mil（Setting distance: 100 mm3.94") 10 µm0.39 Mil（Setting distance: 500 mm19.68") 80 µm3.15 Mil（Setting distance: 1,000 mm39.37") 140 µm5.51 Mil（Setting distance: 1,500 mm59.06")^*3
Linearity		±0.28 % of F.S. (±28 µm±1.10 Mil)^*4	±0.1 % of F.S. (±28 µm±1.10 Mil)^*4
Temperature characteristics		±0.03 % of F.S./°C (±3 µm±0.12 Mil/°C)^*5	±0.01 % of F.S./°C (±3 µm±0.12 Mil/°C)^*5
Operation indicator	Transmitter	Optical axis alignment indicator: Green LED, Power indicator: Green LED
	Receiver	Optical axis alignment indicator: Green LED, Position monitor: Dual bar LED (Red, Green)
Environmental resistance	Enclosure rating	IP67
	Ambient light	Incandescent lamp: 5,000 lux, Sunlight: 5,000 lux^*6
	Ambient temperature	-10 to +45 °C14 to 113 °F（No freezing)
	相对湿度	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm0.06", 2 hours in each of the X, Y, and Z axis
Material	Case	Zinc die-cast (Lower case), PBT (Upper case), Polyarylate (PAR) (Display part), SUS304 (Metallic part)
	Lens cover	Glass
	Cable	PVC
Accessories		发射机×1,接收器×1,Sensor head cables (2 m6.56') × 2
Weight		Approx. 380 g (including supplied items)	Approx. 500 g (including supplied items)
^1The classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. ^2When the measurement target object is measured at the center position of the setting distance. When the measurement mode is set to the glass edge mode, a glass edge of C0.1 mm0.003"or more can be detected (Setting distance: 500 mm19.69"). ^3When the light is shielded by half at the center position of the setting distance. Vibration width when the average number of times is set to 16 and sampling is performed for 30 seconds. (When the analog output is used, the margin of error of analog output is added.) ^4When the setting distance is 100 mm3.94"and light is shielded at 50 mm1.96"position from the receiver. Margin of error to the ideal line. ^5When the setting distance is 100 mm3.94"and light is shielded by half at 50 mm1.96"position from the receiver. ^6Excluding when the average number of times is set to [hsp].

Model				IG-1000	IG-1050	IG-1500	IG-1550
Image
Type				DIN rail mount		Panel mount
Main unit/Expansion unit				Main unit	Expansion unit	Main unit	Expansion unit
Analog output				Yes	No	Yes	No
Power consumption （including analog current output)	Normal			2700 mW or less (at 30 V: 90 mA or less)^*1		2880 mW or less (at 30 V: 96 mA or less)^*1
	Power saving function (HALF)			2300 mW (at 30 V: 77 mA or less)^*1
	Power saving function (ALL)			2200 mW (at 30 V: 74 mA or less)^*1
Digital display method				Dual 7-seg display Upper level: Red, 5 digits Lower level: Green, 5 digits		Dual 7-seg display Upper level: Red/Green, 2 colors, 5 digits Lower level: Green, 5 digits
Display range				-99.999 to +99.999, -99.99 to +99.99, -99.9 to +99.9, -99 to +99 (selectable)
Display resolution				1 µm0.04 Mil, 10 µm0.39 Mil, 100 µm3.94 Mil, 1,000 µm39.37 Mil（selectable)
Output	Judgement output （selectable between NPN and PNP)			NPN (PNP) open collector x3ch, 30 VDC (Power supply voltage) or less, residual voltage 1 V (2 V) or less, N.O./N.C. selectable Max. 50 mA/ch^*2
	Response time (judgement output)			1.96 to 4031.72 ms^*3
	Edge check output （selectable between NPN and PNP)			NPN (PNP) open collector x1ch, 30 VDC (Power supply voltage) or less, residual voltage 1 V (2 V) or less, N.O./N.C. selectable Max. 50 mA,^*2response time 20 ms
	Analog output （selectable among ±5V, 1-5 V, 0-5 V, 4-20 mA)	Voltage output	Output range	±5 V (full scale 10 V)
			输出电阻	100 Ω
			Maximum load resistance	―
			Repetition accuracy	±1 mV
			Display accuracy	±0.05% of F.S.
			Temperature characteristics	±0.005% of F.S./°C
			Update cycle	Same as sensor head sampling cycle
			Response time	Same as Response time (judgement output)
			Time constant	10 µs (90 % response)^*4
		Current output	Output range	4-20 mA (full scale 16 mA)
			输出电阻	―
			Maximum load resistance	350 Ω
			Repetition accuracy	±1.5 µA
			Display accuracy	±0.25% of F.S.
			Temperature characteristics	±0.01% of F.S./°C
			Update cycle	Same as sensor head sampling cycle
			Response time	Same as Response time (judgement output)
			Time constant	30 µs (90 % response)^*4
Input	Gain input			Input time: 20 ms or more, Response delay time: 120 ms or less (Nonvolatile memory (EEPROM) 1.5 s or less)
	Reset input			Input time: 20 ms or more, Response delay time: 20 ms or less
	Timing input			Input time: 2 ms or more, Response delay time: 2 ms or less
	Zero shift input			Input time: 20 ms or more, Response delay time: 20 ms or less
	Bank A input/Bank B input			Input time: 20 ms or more, Response delay time: 20 ms or less^*3
	Laser emission stop input			Input time: 2 ms or more, Response delay time: 2 ms or less
Rating	Power voltage			10 to 30 VDC, including Ripple (P-P) 10 %, Class 2 or LPS
Environmental resistance	Pollution degree			2
	Ambient temperature			-10 to +50 °C14 to 122 °F（No freezing)
	相对湿度			35 to 85 % RH (No condensation)
	Vibration resistance			10 to 55 Hz, Double amplitude 1.5 mm0.06", 2 hours in each of the X, Y, and Z axis
Material				Main unit case/Front sheet: Polycarbonate, Key top: Polyacetal, Cable: PVC
Accessories				Main body × 1, Instruction manual × 1	Main body × 1	Main body × 1, Panel mounting bracket × 1, Front protection cover × 1, Power supply and input/output cable (2 m6.56') × 1, Instruction manual × 1	Main body × 1, Panel mounting bracket × 1, Front protection cover × 1, Power supply and input/output cable (2 m6.56') × 1, Expansion cable (50 mm1.97") × 1
Weight				Approx. 150 g (including supplied items)	Approx. 140 g (including supplied items)	Approx. 170 g (including supplied items)	Approx. 165 g (including supplied items)
^1The power consumption with slave units installed is the total of each amplifier unit's power consumption. ^2When expansion units are added: Max. 20 mA/ch ^3For more details, refer to the User's Manual. ^4Delay time that occurs from the analog output circuit after the judgment is output.