
Amplifier Separate Type Photoelectric Sensor
PS-N series
放大器单元,出租车le Type, Main Unit, NPNPS-N11N
Specifications
Model |
PS-N11N |
|||
Type |
Cable |
|||
Output |
NPN |
|||
Main unit/Expansion unit |
Main unit |
|||
I/O |
Control outputs |
1 output |
||
External input |
1 input |
|||
Output selection |
LIGHT-ON/DARK-ON (switch-selectable) |
|||
Timer function |
Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, Timer duration selectable: 1 ms to 9999 ms, Maximum error against the setting value: ±10% max. |
|||
Control output |
NPN open collector 30 V, (without expansion) 100 mA max., (with expansion) 20 mA max, |
|||
Number of interference prevention units |
4 for TURBO/SUPER/ULTRA/MEGA (When set to DOUBLE, the number of interference-prevention units will be doubled) |
|||
Response time |
500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) |
|||
External input |
输入时间2(上)/女士20 ms()或更多*1 |
|||
Case size |
H 32.6 mm1.28"× W 9.8 mm0.39"× L 78.7 mm3.1" |
|||
Unit expansion |
Up to 17 main units can be connected |
|||
Protection circuit |
Reverse polarity protection, Over-current protection, Surge absorber |
|||
Rating |
Power voltage |
24 VDC (operating voltage 10 to 30 VDC (with ripple)), Ripple (P-P) 10 % or less, Class 2 or LPS |
||
Power consumption |
Normal: 810 mW or less (at 30V. 28 mA max. at 24 V, 34 mA max. at 12 V) |
|||
Environmental resistance |
Ambient temperature |
-20 to +55 °C4到131°F(No freezing)*2 |
||
相对湿度 |
35 to 85 % RH (No condensation) |
|||
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm0.06", 2 hours in each of the X, Y, and Z directions |
|||
Shock resistance |
500 m/s2, 3 times in each of the X, Y, and Z directions |
|||
Material |
Case |
Main unit and cover material: Polycarbonate |
||
Cable |
PVC |
|||
Weight |
Approx. 75 g |
|||
*1Input time is 25 ms (ON)/25 ms (OFF) when the external calibration time is selected. |
||||

