Standard Model, M8 Connector Type, 100mm rangeLR-X100C

Specifications

Model

LR-X100C

Type

M8连接器类型*1

Detecting Distance

25.0 to 100.0 mm0.98" to 3.94"

Standard Detectable Deviation

1.0 mm0.04"

Display Resolution

0.1 mm0.004“

Spot Size

Approx. 0.3 mm × 2 mm0.012“×0.08”
(at a detecting distance of 100 mm3.94")

Response Time

500 µs*2/1 ms/3 ms/10 ms/200 ms可选

Light Source

Type

Green laser (505 nm)

Laser Class

Class 1 Laser Product (IEC60825-1, FDA (CDRH), Part1040.10*3)

IO-Link

Specification v1.1/COM2 (38.4 kbps)

Functions

Timer Function

Timer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shot

I/O

Control Output

NPN打开收集器/PNP Open Collector,N.O./N.C可选。  *4
30 VDC或较低,50 mA或较低的残留电压2 V或较低

External Input

External Set/Laser OFF/Zero Shift/Hold Reset/Gyro Alert RST selectable  *4
Short circuit current - NPN: 1 mA or lower, PNP: 2 mA or lower
Input time 3 ms or more ON, 20 ms or more OFF
(25 ms or more ON, 25 ms or more OFF when External Set is selected only)

Protection Circuit

Protection against reverse power connection, protection against output overcurrent,
protection against output surge, protection against reverse output connection

Power supply

电压

16至30 VDC(包括10%波纹(P-P)或更少),第2类

Power consumption

During normal operation: 970 mW (38 mA or lower at 24 V, 53 mA or lower at 16 V) (Excluding Load Current)
ECO ON/ALL: 821 mW (32 mA or lower at 24 V, 44 mA or lower at 16 V) (Excluding Load Current)

Environmental resistance

Enclosure rating

IP65/IP67 (IEC60529)

Ambient light

Incandescent lamp: 16000 lux or less
Sunlight: 16000 lux or less

Ambient temperature

-10°C至 +50°C14°F to + 122°F(no freezing)

相对湿度

35至85%RH(无凝结)

Vibration resistance

10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz for X, Y and Z axes

Shock resistance

1000 m/s2(100G) 6 times each for X, Y, and Z axes

Material

Head Case: SUS316L; Head Lens Cover: PSU
头垫片:FKM(镜头盖),EVM(电缆)
Cable: PVC
Amplifier Case: PBT; Amplifier Display, Indicator: PAR; Amplifier Gasket: NBR; Button: POM
Amplifier M8 Connector: SUS303

配件

Instruction manual, laser warning label

Weight

Approx. 35 g

*1Ensure the cable length is 30 m98.4'or less for the M8 connector type. Ensure the cable length is 20 m65.6'or less when connecting via IO-Link.
*2If 500 µs is selected, the following limitations apply.
·只能执行2分校准。
· The detection range masking is set during calibration. (Manual setting of the masking range is not supported.)
· Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used.
*3Classification performed based on IEC60825-1 standards in accordance with FDA (CDRH) Laser Notice No. 56.
*4The I/O can be selected from the following combinations. Control output × 2, Control output + External input

Other Models