数字光纤传感器

FS-V30 series

CatalogsView Catalog

Fiber Amplifier, M8 Connector Type, Main Unit, PNPFS-V31CP

FS-V31CP - Fiber Amplifier, M8 Connector Type, Main Unit, PNP

  • CE Marking
  • UL Listing(c/us)

Specifications

Model

FS-V31CP

Type

1-output + 1-input
使用M8连接器

Output

PNP

主要单位/扩展单位

Main unit

Control output

1 output

Monitor output (1 to 5 V)

N/A

External input

1输入

Connector

M8

Light source LED

Red, 4-element LED (Wavelength: 640 nm)

Response time

33μs(高速)/250μs(细)/500μs(Turbo)/ 1 ms(超涡轮增压器)/ 4 ms(超涡轮增压器)/ 16 ms(Mega Turbo)

Output selection

LIGHT-ON/DARK-ON (switch-selectable)

Display indicator

Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and
Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,
Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations
Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display

大小

30.3毫米(h)x 9.8 mm(w)x 71.8 mm(d)1.19" (H) x 0.39" (W) x 2.83" (D)

检测模式

Light intensity (area detection possible, automatic sensitivity-tracking function provided)

Timer function

OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable
Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.

Control output

PNP open-collector 24 V, 100 mA max.*1(main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.

External inputy

Input time: 2 ms (ON)/20 ms (OFF) min.*2

单位扩展

最多可连接16个扩展单元(共17个单位)。请注意,2-输出类型应计为两个单位。

Number of interference prevention units

普通手术

HIGHSPEED:0 FINE:4 TURBO/SUPER/ULTRA/MEGA:8台

Rating

电源电压

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Power consumption

正常:750 MW MAX。(使用24 V,31 mA最大值,使用12 v,40 ma max。)/
Power saving 580 mW max. (Using 24 V, 24 mA max., using 12 V,
28 mA max.)*3

Environmental resistance

Ambient light

白炽灯:20,000勒克斯最多。,阳光:30,000勒克斯最多。

Ambient temperature

-10 to +55 °C14 to 131 °F(No freezing)*4

相对湿度

35 to 85 % RH (No condensation)

Vibration resistance

10至55 Hz,双幅度1.5毫米0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance

500米/秒2, 3 times in each of the X, Y, and Z directions

Case material

Polycarbonate

配件

N/A

Weight

Approx. 80 g

*1Total current of two outputs should be less than 100 mA.
*2Only available on certain models.
*3When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).
*4If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.
1 to 2 Units: -10 to +55 °C14 to 131 °F, 3 to 10 Units: -10 to +50 °C14 to 122 °F, 11 to 16 Units: -10 to +45 °C14 to 113 °F

Other Models