Power-to-lock Standard type NPN Standard cable 10 mGS-71N10

GS-71N10 - Power-to-lock Standard type NPN Standard cable 10 m

Data Sheet (PDF)

Manuals

CAD Data

360°view (3D PDF)

View Catalog

Data Sheet (PDF)

Specifications

Model			GS-71N10
Lock type			Power-to-lock type
Type			标准类型
Response time	Lock	Lock→Unlock	320毫安^1^2
		Unlock→Lock	220毫安^1^2^*3
Lock	Locking force (Fzh)		Min. 2,000 N
	Alignment tolerance of lock		±2毫米±0.08"
	Mechanical life-span		1 million cycles or more (with door operation speed of 1 m/s)
	Acceptable operation frequency		1 Hz^*4
	Door radius		Min. 250 mm9.84"
	Auxiliary release		Front, back^*5
Cascading			最大限度。25 units
Control output (OSSD output)	Output		Transistor outputs × 2
	最大限度。load current		最大限度。100 mA
	剩余电压（在上）		Max 2.5 V (with a cable length of 5 m16.40')
	OFF state voltage		最大2.0 V（电缆长度为5米16.40')
	Leakage current		最大限度。0.5 ma.
	最大限度。capacitive load		2.2 µF
	Load wiring resistance		最大限度。2.5 Ω
AUX (Non-safety related output)	Output		Transistor output
	Number of outputs		1
	最大限度。load current		50 mA
	剩余电压（在上）		Max 2.5 V (with a cable length of 5 m16.40')
External input (Short-circuit current)	安全输入		约。1.5 mA × 2
	Reset/EDM input		-
	Lock control input		约。2.5 ma×1
	OSSD operation switching input		-
Applicable Standards (Safety)			EN 61508, IEC 61508(SIL2/SIL3) EN 62061, IEC62061(SIL CL2/SIL CL3) EN ISO13849-1: 2015(PLd, Category 2/PLe, Category 4) EN ISO14119(Type4) IEC 60947-5-3, EN 60947-5-3 UL 61010-1, CAN/CSA-C22.2 No.61010-1
保护电路			Reverse current protection, short-circuit protection and surge protection for each output
Power supply	电源电压		24 V DC±20％（纹波P-P10％以下，类别2）
	Power consumption		3.4 W.^*6
Environmental resistance	Enclosure rating		IP65/67(IEC60529), IP69K(ISO 20653) (TÜV SÜD certified), Enclosure Type 3/4X/12/13 (NEMA250)
	Operating ambient temperature		-20°C to +55C°-4°F至131°F(No freezing)
	Storage temperature		-25°C to +70°C-13°F to 158°F(No freezing)^*7
	Operating relative humidity		5% to 95%RH
	Storage relative humidity
	Vibration resistance		10至55 Hz，双幅度2.0毫米0.08", 5 minutes in each of the X, Y, and Z directions (IEC 60947-5-3)
	Shock resistance		30 g在x，y，z方向6次每个轴（IEC 60947-5-3）
Material	Sensor main unit	Case	SUS304, PPS, PBT, PAR, PA66, NBR
		Lock	Aluminum alloy, Zinc die cast (Nickel chrome plating)
		电缆	PVC
	执行器	Case	PPS, PBT, NBR
		Lock	铝合金，SUS303
Weight			约。770 G.
^1根据IEC60947-5-3的风险时间为150ms + 2 ms×（级联单位数-1）。 ^2If the OSSD operation is open/close link mode, Detect→ Not detect: 20 ms + 2 ms × (number of units cascaded -1), Not detect → Detect: 30 ms + 25 ms × (number of units cascaded -1) ^3当锁在同一时间t 430 mshe actuator is detected. ^4Acceptable door operation frequency is 3 Hz if the OSSD operation is open/close link mode. In that case, operation distance is Sao(OFF→ ON) = 3 mm0.12“, Sar(OFF→ ON) = 10.5 mm0.41". ^5Do not apply excessive torque (0.45N·m or higher). ^6Power consumption temporarily increases (Max. 10.5 W, Approx. 0.2 s) when the lock control input(s) is(are) turned ON. After that, current consumption will be within the specification. ^*7When stored for a long period of time, please store it at a temperature of 55°C131°For lower.

Other Models