
Safety Controller
GC series
Main controller Standard typeGC-1000
Specifications
Model |
GC-1000 |
|||
Input/output points |
Safety inputs |
16 |
||
Safety outputs |
6 |
|||
Safety relay output |
- |
|||
AUX outputs |
4 |
|||
Test outputs |
||||
Maximum number of connectable expansion units |
10*1 |
|||
Maximum number of connectable remote I/O modules |
4 |
|||
GC-Link ports |
2 ports |
|||
Safety input specifications |
Input device |
Contact output device or PNP output device |
||
Input type |
Type3 |
|||
ON level (voltage/current) |
Min. 11 V/2 mA |
|||
OFF level (voltage/current) |
Max. 5 V/1.5 mA |
|||
Short-circuit current |
Si 0 to 3: Approx. 5 mA |
|||
保护电路 |
Surge protection circuit, wrong wiring protection circuit |
|||
Maximum cable length |
Max. 100 m328.1' |
|||
Safety output specifications |
Output type |
PNP transistor output (DC-13, Type 0.5, Protected outputs)*2 |
||
Maximum load current |
500 mA |
|||
Residual voltage (during ON) |
Max. 2.0 V |
|||
Leakage current (during OFF) |
Max. 0.5mA |
|||
Maximum capacitive load |
0.5 µF |
|||
Load wiring resistance |
Max. 2.5Ω |
|||
保护电路 |
Overcurrent protection circuit, reverse connection protection circuit |
|||
Maximum cable length |
Max. 30 m98.4' |
|||
Safety relay output specifications |
Output type |
- |
||
Rated load (resistance load) |
||||
Rated load (inductive load) |
||||
Relay output mechanical life |
||||
Maximum cable length |
||||
B10d |
||||
Test output specifications |
Output type |
PNP transistor output*3 |
||
Maximum load current |
100 mA |
|||
保护电路 |
Overcurrent protection circuit, reverse connection protection circuit |
|||
Maximum cable length |
Max. 100 m328.1'*4 |
|||
AUX output specifications |
Output type |
Transistor output (PNP/NPN selectable by wiring) |
||
Maximum load current |
PNP: 100 mA, NPN: 20 mA |
|||
Residual voltage (during ON) |
Max. 2.0 V |
|||
Leakage current (during OFF) |
Max. 0.5 mA |
|||
保护电路 |
Overcurrent protection circuit, reverse connection protection circuit |
|||
Maximum cable length |
Max. 30 m98.4' |
|||
Communication interface |
USB |
USB2.0 |
||
Ethernet |
100BASE-TX |
|||
Network functionality |
EtherNet/IP™*5, PROFINET, Modbus/TCP, MC protocol, UDP |
|||
Others |
LCD display |
1.77-inch color LCD |
||
显示按钮 |
4 points (3 operation keys + 1 BACK key) |
|||
Applicable standards |
EMC |
EMS: IEC 61131-2/-6, EN61131-2/-6 |
||
Safety |
IEC 61508,EN61508 SIL3 |
|||
Dimensions |
60×95×90 mm2.36"× 3.74"×3.54"(W×D×H) |
|||
Power supply |
Power voltage |
24 VDC (-30 to +20%) Class 2 |
||
Power consumption |
Max. 200 mA |
|||
Environmental resistance |
Ambient temperature |
−10 to +55 °C14 to 131 °F(No freezing) |
||
Storage temperature |
−25 to +70 °C-13 to 158 °F(No freezing) |
|||
相对湿度 |
5 to 85% (No condensation) |
|||
Operating altitude |
Max. 2000 m6561.7' |
|||
过电压category |
II |
|||
Pollution degree |
2 |
|||
Vibration resistance |
Frequency: 5 to 9 Hz, Half amplitude: 3.5 mm0.14" |
|||
Shock resistance |
Acceleration: 150 m/s2, Operating time: 11 ms, 3 times each in X, Y, Z directions |
|||
Material |
Polycarbonate |
|||
Weight |
Approx. 260 g |
|||
*1The bus extension unit “GC-B30” is not included in this number, and only one set of “GC-B30” can be used per setup. |
||||

