传感器头最大额定流速20 L/minFD-XS20

FD-XS20 - Sensor head Maximum rated flow rate 20 L/min

Data Sheet (PDF)

Manuals

Specifications

模型				FD-XS20
188bet在线支撑的管道材料				Metal pipes, Plastic pipes (soft/hard)^*1
Supported fluids				液体(水,油, adhesive, grease, chemical solutions, etc.)^*1
188bet在线支持的流体温度				0 °C (no freezing on the pipe surface) to 100 °C32 to 212 °F(Pipe surface temperature)
夹具集模型	Plastic pipe/tube attachment			FD-XC20R1, FD-XC20R2, FD-XC20R3, FD-XC20R4
	Metal pipe attachment			FD-XC20M1, FD-XC20M2^*2
Maximum rated flow rate				Outer diameter of pipe 3/8 " (9.53 mm) , ø 100.39 ", ø 10.50.41 ": 0 to 15.00 L/min Outer diameter of pipe ø 120.47 "，1/2“（12.7毫米），Ø13.80.54 ": 0 to 20.00 L/min
Zero cut flow rate				0.10 L/min (standard), 40 mL/min (high resolution^3)^4(variable, default)
Display resolution	瞬时流速			0.001/0.01/0.1 L/min (standard), 0.1/1/10 mL/min (high resolution^*3) (Displayed on controller)
	Shot amount			0.001/0.01/0.1 L (standard), 0.001/0.01/0.1/1 mL (high resolution^*3) (Displayed on controller)
Repeatability	Plastic pipe/tube attachment	Response time: 50 ms	F.S.	±0.1％^5^6
			瞬时流速	Outer diameter of pipe 3/8 " (9.53 mm) , ø 100.39 ": ±15 mL/min Outer diameter of pipe ø 120.47 "，1/2“（12.7毫米）：±20 ml/min^5^6
		Response time: 500 ms		Outer diameter of pipe 3/8 " (9.53 mm) , ø 100.39 "：±4.7 ml/min Outer diameter of pipe ø 120.47 ", 1/2 " (12.7 mm): ±6.3 mL/min^*5
	Metal pipe attachment	Response time: 50 ms	F.S.	±0.15％^5^6
			瞬时流速	Outer diameter of pipe 3/8 " (9.53 mm) , ø 100.39 ", ø 10.50.41 ": ±23 mL/min Outer diameter of pipe ø 120.47 "，1/2“（12.7毫米），Ø13.80.54 ": ±30 mL/min^5^6
		Response time: 500 ms		Outer diameter of pipe 3/8 " (9.53 mm) , ø 100.39 ", ø 10.50.41 ": ±7.2 mL/min Outer diameter of pipe ø 120.47 "，1/2“（12.7毫米），Ø13.80.54 "：±9.5 ml/min^*5
Hysteresis				多变的
Integrated unit display				0.01/0.1/1/10/100 L (standard), 0.1/1/10/100/1000/10000 mL (high resolution^*3) (displayed on controller)
Display method				Status indicator
环境阻力	Enclosure rating			IP65/IP67 (IEC60529) , IP68G (JIS C0920)^*7
	Ambient temperature			-10 to 60 °C (No freezing)14 to 140 °F
	相对湿度			35 % to 85 %RH (No condensation)
	振动阻力			10至55 Hz，双振幅1.5毫米0.06 ", 2 hours each for X,Y,Z direction
	Shock resistance			50 G 11 ms 3 times each for X,Y,Z direction
Material	Sensor head			Head body: PPS/PPSU, in-cable amplifier: PPS, cable: PVC, controller connector: PPS/PBT/POM
	Clamp set	For plastic pipe		Body, fixing screw: PPS, detection surface: special rubber, pipe support rubber: FKM, sensor head fixing screw: SUSXM7
		For metal pipe		金属：SUS304/SUSXM7，检测表面：特殊橡胶，夹具支撑橡胶：FKM，传感器头固定螺钉：SUSXM7188bet在线
Weight				Approx. 260 g
^1Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Readings may become unstable depending on the type of pipe. ^2When using stainless steel or iron pipes, the ideal pipe wall thickness is as follows, FD-XS1: approx. 0.5 mm0.02", FD-XS8: approx. 1 mm0.04", FD-XS20: approx. 10.04"to 2 mm0.08". FD-X signal strength and stability will decrease as the thickness of the pipe wall increases or decreases from the suggested size. ^3Only controllers with serial numbers beginning with “G” (FD-XA1/XA2/XA5) are supported. ^4零切口流速可以在设置中更改。当使用低流速范围的单元时，如果更改零切口流量，则在流体不移动时执行原点调节。 ^5This specification is valid when the flow velocity distribution is stable. This value does not take into account the effects of pulsation or fluctuations in flow velocity distribution due to facility factors. Convert the F.S. (full scale value) listed in the table according to the rated flow range. ^6The longer the response time is set, the more repeatability is improved. As a guideline, use √ (50 ms/response time) times. ^*7传感器头电缆的连接器部分是IP65/IP67。

Other Models