Sensor Head, PPS Type, 100 L/minFD-P100

FD-P100 - Sensor Head, PPS Type, 100 L/min

Specifications

Model		FD-P100
Display power		Flow indicator: Green LED, Error indication: Red LED
Detecting area		10 to 100 L/min
Detection fluids		Liquid (liquid that does not erode PPS)^*1
Detection fluid temperature		0 to +100°C32 to 212°F(No freezing, no boiling)^*2
Connection port		PT 1''
Environmental resistance	Enclosure rating	IP65
	Pressure resistance	1.0 MPa
	Ambient temperature	0 to +60 °C32 to 140 °F(No freezing)
	相对湿度	5 to 80 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm0.06", 3 hours in each of the X, Y, and Z axis
	Shock resistance	300 m/s², 10 times in each of X, Y and Z axis, 60 times in total
Material		玻璃增强PPS
Accessories		Relay cable (M12 connector 3 m), Sensor head connector: 1
Weight		Approx. 270 g (including 0.3-m M12 connector cable)
^1If the viscosity of the liquid is too high, measurement cannot be performed. Refer to the "Accuracy warranted detection range" table as shown below. ^2If freezing occur inside piping, the sensor head will possibly become damaged.