SpecsThrubeam Type Laser Detection SensorIB series

Model		IB-01	IB-05	IB-10	IB-30
Image
Light source	Wavelength	660 nm (Visible light semiconductor laser)
	Laser Class	Class 1 Laser Product (IEC 60825-1, FDA (CDRH) Part 1040.10^*1)
Installation distance		0 to 2,000 mm78.74"	0 to 300 mm11.81"
Measurement range		ø1 mmø0.04”(Installation distance 0 to 300 mm11.81") ø1 to 2.5 mm (Installation distance 300 to 2,000 mm11.81" to 78.74")	5 mm0.20"	10 mm0.39"	30 mm1.18"
Sampling cycle		12,500 times/sec. (80 µs)
Minimum detection target		ø8 µmø0.31 Mil(Installation distance 0 to 300 mm11.81") ø8 to 50 µmø0.31 to 1.97 Mil(Installation distance 300 to 2,000 mm11.81" to 78.74")^*2	ø0.05 mmø0.002"^*2	ø0.1 mmø0.004"^*2	ø0.2 mmø0.01"^*2
Repeatability		5 µm0.20 Mil(distance 0 to 300 mm11.81")^*3	5 µm0.20 Mil^*3		10 µm0.39 Mil^*3
Temperature characteristics		±0.2 % of F.S./°C^*4	±0.1 % of F.S./°C (±5 µm0.20 Mil)^*4	±0.1 % of F.S./°C (±10 µm0.39 Mil)^*4	±0.1 % of F.S./°C (±30 µm1.18 Mil)^*4
Operating indicators		Laser emission warning indicator: green LED
Environmental resistance	Ambient light	Incandescent lamp: 5,000 lux, Solar light: 10,000 lux	Incandescent lamp: 5,000 lux, Solar light: 5,000 lux	Incandescent lamp: 10,000 lux, Solar light: 10,000 lux
	Ambient temperature	0 to +40 °C32 to 104 °F(No freezing)	0 to +50 °C32 to 122 °F(No freezing)
	相对湿度	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm0.06", 2 hours in each of the X, Y, and Z axis
Material	Case	PBT	Galvanized die cast
	Lens cover	Glass
	Cable	PVC (2 m6.6')
Weight		Approx. 140 g	Approx. 180 g	Approx. 220 g	Approx. 510 g
^1The classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No. 50. ^2Value when measuring the target (white diffuse object) at the middle of the transmitter and receiver position, and at the center of the measurement range. ^3When distance between transmitter and receiver is set to 300 mm11.81", and light is half-shielded at a position 150 mm5.91"from receiver. Deflection width (±2σ) when sampled for 30 seconds with an average number of times set to 64 times. ^4When distance between transmitter and receiver is set to 100 mm3.94"and full light is received.

Model		IB-1000	IB-1500	IB-1050	IB-1550
Image
Type		DIN rail mount	Panel mount	DIN rail mount	Panel mount
Main unit/Expansion unit		Main unit		Expansion unit
Head compatibility		Yes
Display	Display resolution	0.01 %, 0.1 %, 1 % (switchable)
	Display range	–99.999 to 99.999, –99.99 to 99.99 –99.9 to 99.9, –99 to 99 (switchable)
	Digital display method	Dual7-segmentdisplay Upper level: 5 red digits Lower level: 5 green digits	Dual7-segmentdisplay Upper level: 2-color (green/red) 5 digits Lower level: 5 green digits	Dual7-segmentdisplay Upper level: 5 red digits Lower level: 5 green digits	Dual7-segmentdisplay Upper level: 2-color (green/red) 5 digits Lower level: 5 green digits
	Operating indicators	Judgment indicator: 2-color (green/red) LED (HI, GO, LO) Bank indicator: Green LED x 4 Laser emission warning indicator: Green LED Others: Green LED x 8, red LED x 3
Analog output voltage		±5 V, 1 to 5 V, 0 to 5 V Output impedance 100 Ω^*1		No
Analog current output		4 to 20 mA Maximum load resistance 350 Ω^*1
Control Input	Bank switch input, zero shift input	Non-voltage input^*2
Control input	Zero shift input
	Laser emission stop input
	Timing input
	Reset input
	Adjust input
Control output	Judgment output (check output)	Open collector (NPN/PNP switchable, N.O./N.C. switchable)^*3
Power supply	Power consumption	2400 mW or less (at 30 V, 80 mA max.)^4^5(including analog current output)	2550 mW or less (at 30 V, 85 mA max.)^4^5(including analog current output)	2400 mW or less (at 30 V, 80 mA max.)^4^5(including analog current output)	2550 mW or less (at 30 V, 85 mA max.)^4^5(including analog current output)
	Power voltage	10 to 30 VDC, including ripple (P-P) 10% Class 2 or LPS^*4		Supplied from main unit^*4
Environmental resistance	Pollution degree	2
	Ambient temperature	-10 to +50 °C (No freezing)
	相对湿度	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, compound amplitude 1.5 mm, 2 hours each for X, Y, Z axes
Material		Main unit case/Front panel: polycarbonate, keytop: polyacetal, cable: PVC
Weight		Approx. 150 g (including accessories)	Approx. 170 g (including accessories)	Approx. 140 g (including accessories)	Approx. 165 g (including accessories)
^1±5 V, 1 to 5 V, 0 to 5 V, or 4 - 20 mA should be selected. ^2The four external input wires are assigned with desired inputs. Rated no-voltage input: ON voltage 2 V or less, OFF current 0.05 mA or less Rated voltage input: Max. input rating 30 V or less, ON voltage 7.5 V or more, OFF current 0.05 mA or less ^3Rated NPN open collector output: Max. 100 mA/ch (20 mA/ch when expansion units are connected), 30 V or less, residual voltage 1 V or less Rated PNP open collector output: Max. 50 mA/ch (20 mA/ch when expansion units are connected), power voltage or less, residual voltage 2 V or less ^4Use with the over current protection device which is rated 30 V or more and not more than 1 A. ^*5Does not include the power consumption of the load. The power consumption with expansion units installed is the total of each amplifier unit’s power consumption. Example: When using one main unit (IB-1000) with two expansion units (IB-1050) (2400 mW X 1) + (2400 mW X 2) = 7200 mW