
2D/3D Laser Profiler
LJ-X8000 series
2D/3D controllerLJ-X8002
规格
Model |
LJ-X8002 |
|||
Head input |
最多2个头单元 |
|||
采样周期(触发间隔) |
[2D mode] Maximum speed of 1 kHz (1 ms)*1 |
|||
注册检查设置的数量 |
SD卡1和2中的每一个最多可用于1000(取决于SD卡容量和设置内容)。外部切换是可能的 |
|||
Master profile / number of reference images |
[2D mode]Maximum 200 per setting per head (depends on SD card capacity) |
|||
存储卡 |
• SD card slot × 2 |
|||
Number of tools |
[2D mode]100/setting (of those, 20 are for misalignment correction) |
|||
界面 |
Control input |
20 points (input terminal block: 5 points, parallel I/O: 15 points) |
||
Control output |
28分(输出端子块:6分,并行I/O:22分) |
|||
RS-232C |
•价值输出和控制I/O((exclusive use with PLC link using an RS-232C port) |
|||
PLC link |
•使用以太网端口或RS-232C端口的值输出,并控制I/O |
|||
以太网 |
•价值输出和控制I/O |
|||
USB |
•可以输出值(仅3D模式),上传/下载检查设置,执行各种模拟,发送/接收各种数据,包括配置文件和图像数据 |
|||
以太网/IPTM值 |
•可以使用以太网端口或可选的以太网/IP™单元CB-NEP20E输入/输出数值并执行控制I/O(不能与PLC链接,Profinet和Ethercat®一起使用) |
|||
PROFINET |
• Can input/output numerical values and perform control I/O using the Ethernet port or the optional PROFINET unit CB-NPN20E (Cannot be used with PLC Link, EtherNet/IP™, and EtherCAT®) |
|||
EtherCAT® |
• Can output numerical values and perform control I/O by connecting the optional EtherCAT® unit CB-NEC20E (Cannot be used with PLC link, EtherNet/IP™, and PROFINET) |
|||
鼠 |
Various menus can be controlled via the dedicated mouse (included with the controller) |
|||
SNTP |
通过连接到SNTP服务器可以自动校正本单元的日期和时间 |
|||
USB HDD |
通过将HDD(最大2 TB)连接到专用USB端口(支持USB 3.0,188bet在线 |
|||
监视输出 |
Analog RGB output, XGA 1024 × 768 (24-bit color, 60 Hz) |
|||
编码器输入 |
1 port: combination RS-422 line-driver output (with 5 V output: maximum 150 mA) open collector output (compatible with 5 V, 12 V, 24 V) |
|||
Response frequency |
RS-422 |
Single phase / Z phase: 1.6 MHz, 2 phase / 1x: 1.6 MHz, 2 phase / 2x: 3.2 MHz, 2 phase / 4x: 6.4 MHz |
||
打开收藏家(OC) |
Single phase / Z phase: 100 kHz, 2 phase / 1x: 100 kHz, 2 phase / 2x: 200 kHz, 2 phase / 4x: 400 kHz |
|||
Laser ON input |
Non-voltage input (Shorted with short pin when shipped from factory) |
|||
冷风扇 |
假如 |
|||
最小显示单元 |
[2D模式] 0.1 µm0.000004",0.01°,0.00001毫米2 |
|||
语 |
Switchable between English, Japanese, Simplified Chinese, Traditional Chinese, Korean, German, French, Italian, Thai, Czech, Hungarian, and Polish |
|||
Ratings |
Power voltage |
24 V DC ±10% |
||
最大电流消耗 |
3.3 A |
|||
Environmental resistance |
环境温度 |
0 to +45°C32至 +113°F(DIN导轨安装) / 0至 +40°C32至 +104°F(基本表面安装) |
||
相对湿度 |
35 to 85% RH (no condensation) |
|||
重量 |
大约2500克 |
|||
*1When the measurement range is narrowed in accordance with the binning settings. |
||||

