Sensor HeadLJ-V7080

LJ-V7080 - Sensor Head

Data Sheet (PDF)

Manuals

Specifications

Model			LJ-V7080
Mounting conditions			Diffuse reflection
Reference distance			80 mm3.15"
Measurement range	Z-axis (height)		±23 mm0.91" (F.S.=46 mm1.81")
	X-axis (width)	NEAR side	25 mm0.98"
		Reference distance	32 mm1.26"
		Far side	39 mm1.54"
Light source	Type		Blue semiconductor laser
	Wavelength		405 nm (visible beam)
	Laser class		Class 2 Laser Product (IEC60825-1, FDA(CDRH) Part 1040.10^*1)
	Output		4.8 mW
Spot size (reference distance)			Approx. 48 mm × 48 µm 1.89" × 0.001890"
Repeatability	Z-axis (height)		0.5 µm0.000020"^2^3
	X-axis (width)		10 µm0.000394"^2^4
Linearity	Z-axis (height)		±0.1% of F.S.^*5
Profile data interval	X-axis (width)		50 µm0.002"
Sampling cycle (trigger interval)			Top speed: 16 µs (high-speed mode), Top speed: 32 µs (advanced function mode)^*6
Temperature characteristics			0.01% of F.S./°C
Environmental resistance	Enclosure rating		IP67 (IEC60529)^*7
	Ambient light		Incandescent lamp: 10,000 lux max.^*8
	Ambient temperature		0 to +45 °C32 to 113 °F^*9
	相对湿度		20 to 85 % RH (No condensation)
	Vibration resistance		10 to 57 Hz, Double amplitude 1.5 mm0.06", 3 hours in each of the X, Y, and Z directions
	Shock resistance		15 G/6 ms
Material			铝
Weight			Approx. 400 g
^1The laser classification for FDA(CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No. 50. ^2This value is from a case in which measurement has been performed with a reference distance with 4,096 times of averaging. ^3测量圆盾ts are KEYENCE standard targets. This value is from a case in which the average height of the default setting area has been measured in height mode. All other settings are default. ^4测量圆盾t is a pin gauge. This value is from a case in which the position of the intersection between the rounded surface of the pin gauge and the edge level has been measured in position mode. All other settings are default. ^5测量圆盾ts are KEYENCE standard targets. The profile data is from a case in which measurement has been performed with 64 times of smoothing and 8 times of averaging. All other settings are default. ^6For high-speed mode, when the measurement area is at its minimum, binning is ON, image capture mode is set to standard, and parallel image capture is ON. All other settings are default. For advanced function mode, when the measurement area is at its minimum, binning is ON and image capture mode is set to standard. All other settings are default. ^7This value is from a case in which the sensor head cable (CB-B) or extension cable (CB-BE) has been connected. ^8This is the illuminance for the light-receiving surface of the sensor head during white paper measurement when light has been shined onto the white paper. ^*9The sensor head must be mounted on a metal plate for use.

Other Models