General Purpose Digital Contact Sensor
GT series
SpecsGeneral Purpose Digital Contact SensorGT series
传感器头：标准/低压力
模型 |
GT-H10 |
GT-H22 |
GT-H10L |
GT-H22L |
|||
Image |
|
|
|
|
|||
类型 |
Sensor head: Standard |
Sensor head: Low-stress |
|||||
Measuring range |
10毫米0.39" |
22 mm0.87" |
10毫米0.39" |
22 mm0.87" |
|||
Measuring force |
Downward mounting |
1.0 n*1 |
1.5 N*1 |
0.3 N*1 |
0.35n*1 |
||
Side mounting |
0.9 n*1 |
1.4 N*1 |
0.25N*1 |
0.3 N*1 |
|||
Upward mounting |
0.8 N*1 |
1.3 N*1 |
0.2 n*1 |
0.25N*1 |
|||
机械响应 |
10 Hz（在23°C的环境温度下73 °F) |
8 Hz（在23°C的环境温度下73 °F) |
7赫兹(在环境temperature of 23 °C73 °F) |
5 Hz (at ambient temperature of 23 °C73 °F) |
|||
可重复性 |
3 µm0.00012"(at ambient temperature of 23 °C73 °F)*2 |
8 µm0.00031"(at ambient temperature of 23 °C73 °F)*2 |
3 µm0.00012"(at ambient temperature of 23 °C73 °F)*2 |
8 µm0.00031"(at ambient temperature of 23 °C73 °F)*2 |
|||
环境阻力 |
Enclosure rating |
IP67 |
- |
||||
Ambient temperature |
-10 to +55 °C14 to 131 °F |
||||||
相对湿度 |
35 to 85 % RH |
||||||
Material |
Housing: TYPE430 Stainless steel, Indicator: Polyarylate, |
Housing: TYPE430 Stainless steel, Indicator: Polyarylate, |
|||||
Weight |
大约115 g（有2-m6.6'电缆） |
大约135 g (With 2-m6.6'电缆） |
大约115 g（有2-m6.6'电缆） |
大约135 g (With 2-m6.6'电缆） |
|||
*1Value read near the center of the measuring range |
|||||||
Sensor head: Air push models
模型 |
GT-A10 |
GT-A22 |
|||
Image |
|
|
|||
类型 |
Sensor head: Air push models |
||||
Measuring range |
10毫米0.39" |
22 mm0.87" |
|||
Measuring force |
Downward mounting |
1.0 n*1 |
1.5 N*1 |
||
Side mounting |
0.9 n*1 |
1.4 N*1 |
|||
Upward mounting |
0.8 N*1 |
1.3 N*1 |
|||
可重复性 |
3 µm0.00012"(at ambient temperature of 23 °C73 °F)*2 |
8 µm0.00031"(at ambient temperature of 23 °C73 °F)*2 |
|||
环境阻力 |
Enclosure rating |
IP67*3 |
|||
Pressure resistance |
1.0 MPa |
||||
施加压力范围 |
0.35 to 0.5 MPa |
||||
Ambient temperature |
0至+55°C32 to 131 °F |
||||
相对湿度 |
35 to 85 % RH |
||||
Material |
Housing: TYPE430 stainless steel, Cylinder: Aluminum alloy, Plastic section of air joint: Polyacetal, Metal section of air joint: Nickel-plated brass, |
||||
Weight |
大约150 g (With 2-m6.6'电缆） |
大约180 g (With 2-m6.6'电缆） |
|||
*1Value read near the center of the measuring range |
|||||
Amplifier unit: NPN output
模型 |
GT-71A |
GT-72A |
GT-75A |
GT-76A |
|||
Image |
|
|
|
|
|||
类型 |
Amplifier unit |
||||||
Mounting method |
DIN rail mount*1 |
Panel mount |
|||||
Output |
NPN输出 |
||||||
Main unit/expansion unit |
Main unit*2 |
扩展单元*2 |
Main unit*2 |
扩展单元*2 |
|||
Power consumption |
Normal |
At 12 V: 1,140 mW (95 mA) or less, At 24 V: 1,200 mW (50 mA) or less |
|||||
节能（ECO） |
在12 V：600 MW（50 mA）或更少，在24 V：840 MW（35 mA）或更少 |
||||||
Display power |
Measured value display |
6位7段LED（红色） |
|||||
Other displays |
2-color 13-level bar LED display (red, green), indicators (red, green) |
||||||
Display range |
-99.999 to 999.999 |
||||||
Display resolution |
1 µm0.000039“ |
||||||
Sampling rate |
2,000 times/second |
||||||
控制输入 |
Timing/preset/bank input |
Timing input: Non-voltage input (relay contact, solid state), input time: 2 ms or more |
|||||
Response time |
hsp (1.5 ms) , 5 ms, 10 ms, 100 ms, 500 ms, 1 s, 5 s |
||||||
高，去，低输出 |
NPN open collector, 50 mA max. (40 V or less), residual voltage: 1 V or less, N.O./N.C. switchable |
||||||
Major functions |
预设，持有，可变滞后，可变响应时间，乘数设置，银行功能（4个银行）， |
||||||
Rating |
电压 |
12 to 24 VDC, Ripple (P-P) 10 % or less*3 |
|||||
环境阻力 |
Ambient temperature |
-10 to +55 °C14 to 131 °F(No freezing) |
|||||
相对湿度 |
35 to 85 % RH (No condensation) |
||||||
振动阻力 |
10至55 Hz，双振幅1.5毫米0.06", 2 hours in each of the X, Y, and Z directions |
||||||
Material |
主体案例：聚碳酸酯，钥匙顶：多焦，前纸：聚碳酸酯，电缆：PVC |
||||||
配件 |
Instruction manual |
Panel mounting bracket, protective front cover, power cable, instruction manual |
Panel mounting bracket, protective front cover, power cable, flat cable for expansion, instruction manual |
||||
Weight |
大约110 g (including the power cable) |
大约110 g（：包括面板安装支架，防护前盖，电源线） |
|||||
*1确保将DIN轨安装放大器安装在DIN导轨上（即，该设备应安装在金属din板上）。有关其他放大器单元的安装，请确保使用端单元（OP-26751）。 |
|||||||
Amplifier unit: PNP output
模型 |
GT-71AP |
GT-72AP |
GT-75AP |
GT-76AP |
|||
Image |
|
|
|
|
|||
类型 |
Amplifier unit |
||||||
Mounting method |
DIN rail mount*1 |
Panel mount |
|||||
Output |
PNP输出 |
||||||
Main unit/expansion unit |
Main unit*2 |
扩展单元*2 |
Main unit*2 |
扩展单元*2 |
|||
Power consumption |
Normal |
At 12 V: 1,140 mW (95 mA) or less, At 24 V: 1,200 mW (50 mA) or less |
|||||
节能（ECO） |
在12 V：600 MW（50 mA）或更少，在24 V：840 MW（35 mA）或更少 |
||||||
Display power |
Measured value display |
6位7段LED（红色） |
|||||
Other displays |
2-color 13-level bar LED display (red, green), indicators (red, green) |
||||||
Display range |
-99.999 to 999.999 |
||||||
Display resolution |
1 µm0.000039“ |
||||||
Sampling rate |
2,000 times/second |
||||||
控制输入 |
Timing/preset/bank input |
Timing input: Non-voltage input (relay contact, solid state), input time: 2 ms or more |
|||||
Response time |
hsp (1.5 ms) , 5 ms, 10 ms, 100 ms, 500 ms, 1 s, 5 s |
||||||
高，去，低输出 |
PNP open collector, 50 mA max. (30 V or less), residual voltage: 1 V or less, N.O./N.C. switchable |
||||||
Major functions |
预设，持有，可变滞后，可变响应时间，乘数设置，银行功能（4个银行）， |
||||||
Rating |
电压 |
12 to 24 VDC, Ripple (P-P) 10 % or less*3 |
|||||
环境阻力 |
Ambient temperature |
-10 to +55 °C14 to 131 °F(No freezing) |
|||||
相对湿度 |
35 to 85 % RH (No condensation) |
||||||
振动阻力 |
10至55 Hz，双振幅1.5毫米0.06", 2 hours in each of the X, Y, and Z directions |
||||||
Material |
主体案例：聚碳酸酯，钥匙顶：多焦，前纸：聚碳酸酯，电缆：PVC |
||||||
配件 |
Instruction manual |
Panel mounting bracket, protective front cover, power cable, instruction manual |
Panel mounting bracket, protective front cover, power cable, flat cable for expansion, instruction manual |
||||
Weight |
大约110 g (including the power cable) |
大约110 g（：包括面板安装支架，防护前盖，电源线） |
|||||
*1确保将DIN轨安装放大器安装在DIN导轨上（即，该设备应安装在金属din板上）。有关其他放大器单元的安装，请确保使用端单元（OP-26751）。 |
|||||||
